isometric isometric title scale date dr dwg rev the information contained in this document is propr ietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 1003p2t1b1m2re 2:1 5/27/2008 T131038 a blr 1 1 p.c. mounting 1 2 3 5 9 pos. 1 pos. 3 without locking ring with standard locking ring panel mounting pos. 1 pos. 2 pos. 3 switch function none on (on) 2-3, 5-6, 8-9 open 2-1, 5-4, 8-7 2 1 3 12.70 [.500 in] 10.70 [.421 in] 6.60 [.260 in] .76 [.030 in] typ. 16.51 [.650 in] note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: gold 5. rating: 0.4 (va) max. @20v max. (ac or dc); 6. electric life: 40,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 5 4 6 8 7 9 circuit: 3pdt e-switch marking on opposite side on (on) a 18114 released for production 5/27/08 blr 1 2 3 3 6 9 4.70 [.185 in] typ. 4.83 [.190 in] typ. keyway (on) = momentary 4.70 [.185 in] 4.83 [.190 in] n 1.85 [.073 in] 2.92 [.115 in] n 1.27 [.050 in] typ. 10.41 [.410 in] 25 5.10 [.201 in] 17.14 [.675 in] 8.89 [.350 in] epoxy seal 1/4-40 uns-2a 6.10 [.240 in] n 6.35 [.250 in] n 2.38 [.094 in] n 6.35 [.250 in] .85 [.033 in] .55 [.022 in]
|